1311和1300的模具

Pressing dies for hydraulic pressing pliers V 1311 and battery pressing plier PVX 1300

NEW: two-stage DUAL crimping technique (first hexagonal pressing, then additional mandrel pressing)

物料编号 物料描述 用于 KRT / KST mm² 用于 KRF / KSF mm²
61795982 13DB8 - 10
61795983 13DB9 - 16
61795984 13DB11 - 25
61813899 13DB13 - 35
61795952 13DB14,5 - 50
61795985 13DB17 - 70
61813874 13DB20 - 95
61813871 13DB22 - 120
61795986 13DB25 - 150
61813873 13DB27 - 185
61795987 13DB30 - 240
61795988 13DB32 - 300
61795950 B7 10 -
61795951 B8 - 10
61795960 B8,5 16 -
61795970 B9 - 16
61795971 B10 25 -
61795972 B11 - 25
61795980 B12 35 -
61795981 B13 - 35
61795990 B14 50 -
61795991 B14,5 - 50
61796000 B16 70 -
61796001 B17 - 70
61796010 B18 95 -
61796020 B19 120 -
61796021 B20 - 95
61796030 B22 150 120
61796031 B24 185 -
61796032 B25 - 150
61796043 13B26 240 -
61796047 13B27 - 185
61796044 13B30 300 240
61796045 13B32 400 300
61796046 13B38 - 400

应用范围

  • Pressing dies for V 1311 and PVX 1300 for crimping cable lugs (KRT/KRF) and butt connectors (KST/KSF)

产品包括

  • Pressing dies are delivered in pairs
  • 以"13B”开头的压模物料号不需要托架,其余压模需要另外购买模具托架。

分类 ETIM 5

  • ETIM 5.0 Class-ID: EC001282
  • ETIM 5.0 类型描述:压接工具内芯,适合电缆接头、电缆终端套管,屏蔽连接

分类 ETIM 6

  • ETIM 6.0 Class-ID: EC001282
  • ETIM 6.0 Class-Description: Insert for crimp tool cable lugs, cable end sleeves, screen connection

  • 成分组成: 首先注明铸模。请注意,铸模支架不一定适合所有铸模(取决于需要压铸的套管电缆终端截面积)
  • 照片和图像不能缩放,也不能代表各自产品的详细图像。